When you are planning to acquire ceramic tiles to get a tile backsplash, roof tiles, wall tiles and even ceramic tiles for ornamentation there are specific factors to understand in selecting which tile is perfect for the application. Not all tiles are the same as well as the differences can see whether your ceramic tiles hold to the use you are putting them.
For instance, low fire tiles or tiles which have only gone through a bisque firing are often cheaper although not as durable as high fired tiles. Whether or not the tile continues to be glazed, it may still need only been through one firing as well as only a low firing and so the fact of computer being glossy and colorful isn't any indication how the tile has the toughness for a high-fired tile. Greenware - ceramics which has dried however, not been fired, might be glazed which has a low fire glaze and fired with a comparatively low temperature.
This type of cermic tile may not be suitable for certain applications. For example if you plan to make use of the tile to get a backsplash, countertop or tabletop you may need a very durable tile that can support frequent cleaning plus the truth of a countertop or tabletop, some hard use too. Stoneware clays include the the most suitable for this type of use. Stoneware is normally fired to about cone 6 (around 2200 degrees F) and it is quite strong.
In your inquiry, don't stop using what type of clay the tiles are made of. Glazes vary enormously and also so-called 'food-safe' glazes can leach out chemicals, stain and lose their color. Many manufactured tiles are poorly made and won't deal with the uses these are marketed for. Needless to say, there are numerous quite excellent manufactured tiles too and that means you should inquire to be certain. That information however may or otherwise be readily available.
The sort of ornamentation in the ceramic tile is important too. For the ceramic countertop or tabletop, the tiles ought to be flat. For a backsplash the tiles may have low relief but high relief is going to be hard to and also isn't generally advised.
Fireplaces, murals, mosaics and facades can be either flat, have low relief or high relief and low fire glazes are OK in these applications. Take care though with areas that will get much use, for example around a fire where logs will likely be placed or fireplace tools will likely be used. Low fire tiles and glazes can crack or chip a lot more easily than stoneware and high fire glazes. Also, if it is a region that will need frequent cleaning, high relief may prove troublesome.
For ceramic walls in dry areas not at the mercy of much physical contact nearly all type of tile and glaze is adequate. For wet areas flat tiles, low relief tiles and even high relief tiles may be used as long as they may not be inside a hazardous place which a body can inadvertently encounter them. A large frog leaping out of your shower wall at body height may not be recommended.
Flooring presents other challenges, and opportunities. Clearly flooring has to be durable really at high point fire stoneware is the greatest choice. Virtually any relief is just not advised as uneven surfaces can be difficult to walk on, especially for the aged. One more consideration with flooring tiles is slickness. A glossy glaze with a floor just isn't recommended. A heavily textured glaze or even a matte glaze is better.
For additional information about ceramic tiles
have a look at our new resource